What Is a PDI Inspection? Ontario New Home Pre-Delivery Guide
ASADS Home Inspection · 2026-11-08
A PDI (pre-delivery inspection) is the walk-through you do with your builder before you take possession of a newly built home or condo in Ontario. It is a required step under the Tarion new home warranty. Anything wrong or unfinished is written on the PDI form, which becomes the record of the home's condition on the day you take it over.
What Happens at a PDI
The builder's representative walks you through the home, usually in about an hour, shows you how the systems work, and records any damaged, incomplete or missing items on the PDI form. You both sign the form and you keep a copy. You can bring someone with you, or send a designate in your place, and many buyers bring their own inspector.
Why the PDI Form Matters
The PDI form is evidence. If a scratch, chip or crack is not on the form, it can be hard to show later that it was there before you moved in rather than caused during the move. Cosmetic damage in particular needs to be recorded at the PDI.
What to Check at Your PDI
- Finishes: scratches or chips on floors, counters, cabinets, tubs and fixtures; drywall dents and paint.
- Doors and windows: they open, close and lock properly; seals and glass are undamaged.
- Plumbing: run every tap and shower, flush every toilet, look for leaks under sinks.
- Electrical: outlets, switches and lights work; GFCI outlets in wet areas.
- Heating and cooling: the furnace or heat pump, thermostat and air conditioning run.
- Exterior: grading slopes away from the house; siding, brick, caulking, driveway and steps.
- Upgrades: everything in your purchase agreement and upgrade list is actually installed.
For a full room-by-room list, see the new build home inspection checklist.
What Comes After the PDI: Tarion Warranty Forms
The PDI is the start of your warranty, not the end. Tarion's statutory warranty has three parts:
- One-year warranty: work and materials, and the home being fit to live in.
- Two-year warranty: water getting in through the building envelope, electrical, plumbing and heating systems, and Ontario Building Code violations affecting health and safety.
- Seven-year warranty: major structural defects.
You report problems using Tarion's forms, including the 30-Day Form in the first 30 days after possession and the Year-End Form in the last 30 days of the first year. Check Tarion's website for the current forms and deadlines, because missing a deadline can affect your coverage.
Should You Bring Your Own Inspector?
The builder's representative is there to record items, not to look for problems on your behalf. An independent inspector checks the home for you, using a thermal camera to find missing insulation, air leaks and moisture that cannot be seen, and gives you a written list to put on the PDI form. Doing it at the PDI means the items are on record from day one.
Book a PDI Inspection
ASADS PDI inspections start from $349, with a same-day report you can bring to your walk-through. See PDI inspection in Toronto, or call (647) 801-9311.